Have you ever heard of powder coating? Do you have any idea simply what it is? Well if you don’t,then this short article is simply what you need. Powder coating is one of the best painting strategies out there nevertheless not everyone understands it. If you want to have the finest paint job outcomes,in powder coating the preparation is very important. The preparation includes the stripping of the bike parts of all its paint. It is very important that the bike parts to be covered must be totally removed of any remaining paint,dirt,oil and any other substance. Sandblasting is required to totally clean up the bike parts. Afterwards,the bike parts are going to be baked to eliminate the moisture from the metal. The bike parts are now treated with degreasing solution to prevent it from rusting.
The procedure of powder coating is used particularly for selected bike parts in which they are covered with a very fine powder of resin along with pigment which is more of a ground up paint grains that form a powder-like substance. The products being covered are then hung on a rack which provides for an electrical ground for the item. A spray wand is then used to spray the powder onto the bike parts. After spraying on the bike parts,these are then baked in a big oven in order to treat the finishing. The usual temperature used for curing is in between 400 and 450 degrees. Another function of curing and baking the bike parts is to melt the pigments,melt the gel in order to create a hard-wearing finish. The end product is an even finishing.
Powder finishing can also be applied to steel,zinc,aluminum as well as to some other products. The great thing about powder finishing is that it has the capability to withstand and exceed the originally painted parts of your bike.
The procedure of powder finishing can be used to paint products including valve covers,wheels,trim parts,sway bars,bumpers,coil springs,strut bars along with other products. For those who are interested there are online along with offline powder finishing businesses that you might rely on. The usual thing required is for you to either mail or bring personally the part or the item of your bike or perhaps your vehicle parts that you wish to have powder coated. An excellent powder finishing company is:
&bnsp;
In Summary
The procedure of powder coating is used particularly for selected bike parts in which they are covered with very fine powder of resin as well as pigment which is more of a ground up paint grains that form a powder-like substance. The great thing about powder finishing is that it has the capability to withstand and exceed the originally painted parts finish of your bike. The procedure of powder coating can be used to paint products including valve covers,wheels,trim parts,sway bars,bumpers,coil springs,strut bars as well as other products. The usual thing required is for you to either mail or bring personally the part or the item of your bike or even your vehicle parts that you want to have powder coated.